high-speed steel的例句大全

In steel frame structure, high-strength bolted splice connections in beams and braces are often used when the lengths of members are limited by transportation or erection.

在钢框架结构中，由于构件运输或吊装能力的限制，以及节点设计的构造要求，高强螺栓拼接节点常用于梁的拼接和斜撑的拼接。

Fusion bonded epoxy coating as a member of high performance coating family has been widely used for corrosion protection of steel pipeline and pipe pile.

熔融结合环氧粉末涂层的综合防护性能优良，已经大量应用于钢质管道和钢管桩，也很适合于钢筋的保护。钢筋表面涂装环氧涂层可用静电喷涂方法，工艺基本成熟。

Effect of water toughening temperature on microstructure and properties of super-high manganese steel with trace boron

水韧处理温度对含硼超高锰钢组织和性能的影响

When about 2% chromium content adds to the high manganese steel with trace boron, the integrated performance is better.

含硼高锰钢中加入2%左右的铬，综合性能较好。

Research on the tensile performance of boron steel at high temperature

硼钢板高温拉伸性能研究

A Study on Delayed Fracture Resistance of Low Carbon Nb-V Microalloying High Strength Cold Heading Boron Steel

低碳Nb-V微合金化高强度冷镦硼钢耐延迟断裂性的研究

Because of its merits of high carrying capacity, upstanding plasticity and toughness, construction convenience, better economic effect and better foundation adaptability, the concrete filled steel tube bow string arch bridge is one of the bridge structures that have broad prospects for development.

钢管混凝土系杆拱桥由于具有承载力高、塑性和韧性好、施工方便、经济效果好和地基适应性强等优点，是发展前景广阔的一种桥梁结构。

High-frequency induction brazing technology and interface microstructure of Al/ 45 steel

Al/45钢高频感应钎焊工艺及界面组织结构

Improvement of High-frequency Induction Brazing Process for Brass and Stainless Steel Tube

黄铜与不锈钢管高频感应钎焊工艺的改进

Development on High-frequency Induction Brazing Solder of Al/ 45 Steel

Al/45钢高频感应钎焊焊料的研制

The high carbon steel wires could fulfill the transformation to pearlite in the 0.25% CMC aqueous solution. But the transformation temperature is higher than that in lead patenting due to its attribution of continuous cooling transformation.

高碳钢钢丝在0.25%CMC水溶液中可完全转变为珠光体组织，但其转变温度由于其连续冷却转变特性而高于在铅浴中的转变温度。

In order to meet the technical requirement of breech ring blank, the past single piece forging for high& mid-strength steel breech ring blank was changed into multiple length forging.

在满足炮尾毛坯锻件技术要求的前提下，采用倍尺锻造法和直接拔长工艺代替传统的单件锻造工艺。

The steel pipe columns of Yantai Broadcasting and Television Center building apply C60 high dropping self-compacting concrete.

烟台广电中心大楼钢管柱采用C60高抛自密实混凝土。

Prospect of application of the high earthquake resistant steel containing micro vanadium-titanium in-seismic design is discussed.

讨论了用钒钛微合金化研制成的高抗震性能结构钢在抗震设计中的应用前景.

Honeycomb sandwich steel panel has light weight , high strength-to-weight ratio, good shock-absorbing and impact endurance.

钢质蜂窝夹芯板具有质轻 、 比强度高 、 减震、耐冲击和节省材料等优点,是一种具有良好发展前途的夹芯板.

The thixoforming is suitable for the controlling semi-solid forming of and steel with high melting point.

由于触变成形工艺本身的特点,使其更适宜于钢铁等高熔点材料的 半固态 成形控制.

These rugged elements are constructed of high-strength woven stainless steel wire mesh.

这些凹凸不平的要素是建造高强度编织不锈钢丝网.

Low temperature fracture path and fracto-graphy of a high nitrogen bearing austenitic steel

高氮奥氏体钢低温断裂途径与断口形貌

The equipment body is made of good quality steel sheet metal. High firmness stability, elegant appearance.

设备骨架采用优质钢通焊制,并采用钣金包装.其设备牢固性及稳定性极强且外形美观.

In addition, the successful development of a new sealant has tackled the sintering problem of diffusion agents at high temperatures and the quality and performance of diffused layer of steel are greatly improved.

研究了一种封闭剂，重点解决了渗剂高温氧化烧结问题，使渗层质量优良、性能稳定。